博客

如何修復led燈遙控器?完整指南

如何修復led燈遙控器?完整指南

Although light-emitting diodes (LEDs) are energy-efficient, what happens if the installation isn’t done correctly, specifically if you don’t get enough white light from them because of their warm tones? There have been some developments in this area, which is fortunate for all the angry homeowners in the area who are trying to find a solution. How are the remote colours for led lights resolved? Here in this article, I will tell you how to fix led lights remote?

什麼是LED燈條?

LED 以更有效率且更具成本效益的方式產生光。它們還具有許多傳統燈泡所沒有的優點,例如壽命長、功耗低等等! LED燈. Many people may not be aware, but LED stands for ‘light-emitting diode.’ These little guys use far less wattage than incandescent lights, saving energy both now and in the future! How do I fix LED light remote colours when it’s not displaying the correct colour? How many ways are there to go about this? Let’s see – we have some different options, so let’s go over them.

修復 LED 遠端燈顏色

首先,您應該按照以下步驟修正 LED 燈遙控器的顏色。步驟如下:

  • Confirm that all of the LED strip kit’s components are properly connected and powered.
  • 關閉電腦(按下右上角紅色按鈕)
  • For one second, press and hold the “FADE7” button.
  • 重新啟動 LED 燈條並依序按下紅色、綠色和藍色按鈕,直到 LED 燈帶恢復到原來的顏色。

1-檢查插頭

顏色問題的原因之一 引領 lights is that they may not have been plugged in properly. Fortunately, it’s a simple fix: just make sure that the black wire on the RGB strip connector matches up with the +12V side and matches colours correctly (R+G+B). Next, ensure that all cables, as well as R-, G-, and B-, are properly connected. Then connect it to the power supply that will power your lights.

2-調整強度級別

It’s possible that the lights are too dim when you first turn them on. To check this, try adjusting their level of brightness using the app controller. This allows you to gradually increase their intensity until they are much brighter and begin to show colours correctly.

3-檢查設定

If you’ve recently installed LED lights in your home or garden and they’re emitting the wrong colour, the solution is simple: check your settings! You should be fine if you haven’t messed with any of the buttons on the remote control and everything is set up correctly. Just make sure you haven’t accidentally turned down one of the dimmer knobs before moving on. The first option is to reset the controller. You should be good to go once you’ve double-checked your settings.

4-購買另一個控制器

如果您目前的控制器給您帶來麻煩,可能是時候更換它了。您有兩種選擇:購買新控制器或新控制器 燈帶. If you’re looking for something a little more unique and high-tech, you might want to check out some of the new lighting brands.

發佈留言