Blog

Come riparare le luci a led remote? Guida completa

Come riparare le luci a led remote? Guida completa

Although light-emitting diodes (LEDs) are energy-efficient, what happens if the installation isn’t done correctly, specifically if you don’t get enough white light from them because of their warm tones? There have been some developments in this area, which is fortunate for all the angry homeowners in the area who are trying to find a solution. How are the remote colours for led lights resolved? Here in this article, I will tell you how to fix led lights remote?

Cos'è la striscia luminosa a LED?

I LED producono luce in modo più efficiente ed economico. Hanno anche molti vantaggi che le lampadine tradizionali non hanno, come la lunga durata, il basso consumo energetico e così via! Luci a LED. Many people may not be aware, but LED stands for ‘light-emitting diode.’ These little guys use far less wattage than incandescent lights, saving energy both now and in the future! How do I fix LED light remote colours when it’s not displaying the correct colour? How many ways are there to go about this? Let’s see – we have some different options, so let’s go over them.

Correggi i colori della luce remota a LED

Per iniziare, dovresti seguire questi passaggi per correggere i colori del telecomando della tua luce a led. I passi sono come segue:

  • Confirm that all of the LED strip kit’s components are properly connected and powered.
  • Spegni il computer (premi il pulsante rosso in alto a destra)
  • For one second, press and hold the “FADE7” button.
  • Riavvia le strisce LED e premi in sequenza i pulsanti Rosso, Verde e Blu finché le strisce LED non tornano al loro colore originale.

1-Controllare la spina

Uno dei motivi del problema del colore con GUIDATO lights is that they may not have been plugged in properly. Fortunately, it’s a simple fix: just make sure that the black wire on the RGB strip connector matches up with the +12V side and matches colours correctly (R+G+B). Next, ensure that all cables, as well as R-, G-, and B-, are properly connected. Then connect it to the power supply that will power your lights.

2-Regolare i livelli di intensità

It’s possible that the lights are too dim when you first turn them on. To check this, try adjusting their level of brightness using the app controller. This allows you to gradually increase their intensity until they are much brighter and begin to show colours correctly.

3-Verifica le impostazioni

If you’ve recently installed LED lights in your home or garden and they’re emitting the wrong colour, the solution is simple: check your settings! You should be fine if you haven’t messed with any of the buttons on the remote control and everything is set up correctly. Just make sure you haven’t accidentally turned down one of the dimmer knobs before moving on. The first option is to reset the controller. You should be good to go once you’ve double-checked your settings.

4-Acquista un altro controller

Se il tuo controller attuale ti dà problemi, potrebbe essere il momento di sostituirlo. Hai due scelte: acquistare un nuovo controller o uno nuovo striscia luminosa. If you’re looking for something a little more unique and high-tech, you might want to check out some of the new lighting brands.

Lascia un commento